Rapid and cost-effective LC–MS/MS method for determination of hydroxycitric acid in plasma: Application in the determination of pharmacokinetics in commercial Garcinia preparations

Garcinia cambogia is one of the most commonly used anti-obesity dietary supplements, and hydroxycitric acid (HCA) is a major constituent in the commercial preparations of Garcinia. High doses of HCA are often consumed without much awareness of its pharmacokinetic and toxicokinetic parameters, and therefore, a complete understanding of its effects is lacking. The first step in understanding these parameters is the availability of a reliable bioanalytical method. Here, we present the first report on a UPLC–MS/MS method for analysis of HCA in rat plasma after a simplified and cost-effective protein precipitation. Chromatographic separation of the analytes in the supernatant was achieved using hydrophilic interaction liquid chromatography, where mass parameters were optimized and a rapid 5-min quantitative assay was developed. The method was highly sensitive, accurate, precise and linear in the concentration range of 10.5–5000 ng/mL (validated according to the United States Food and Drug Administration guidelines). Further, the method was successfully used to describe the pharmacokinetic profile of HCA in rat plasma after the administration of pure HCA and commercial Garcinia preparations.     

Simultaneous determination of colchicine and febuxostat in rat plasma: Application in a rat pharmacokinetic study

A selective, sensitive and rapid LC–MS/MS method has been developed and validated as per US Food and Drug Administration regulatory guidelines for the simultaneous quantitation of colchicine and febuxostat in rat plasma. Colchicine and febuxostat were extracted from the rat plasma using 10% tert-butyl methyl ether in ethyl acetate using colchicine-d₆ as an internal standard (IS). The chromatographic separation of colchicine, febuxostat and the IS was achieved using a mobile phase comprising 5 mm ammonium formate and 0.025% formic acid in acetonitrile (20:80, v/v) in isocratic mode on an Eclipse XDB-C₁₈ column. The injection volume and flow rate were 5.0 μl and 0.9 ml/min, respectively. Colchicine and febuxostat were detected by positive electrospray ionization in multiple reaction monitoring mode using transition pairs (Q1 → Q3) of m/z 400.10 → 358.10 and 317.05 → 261.00, respectively. The assay was linear in the ranges of 0.25–254 and 2.60–622 ng/ml for colchicine and febuxostat, respectively. The inter- and intra-day precision values were 0.58–13.0 and 1.03–4.88% for colchicine and febuxostat, respectively. No matrix or carryover effects were observed during the validation. Both analytes were stable on the bench-top, in the autosampler and in storage (freeze–thaw cycles and long-term storage at −80 ° C). A pharmacokinetic study in rats was performed to show the applicability of the validated method.     

A dried blood spot assay with HPLC–MS/MS for the determination of larotrectinib in mouse blood and its application to a pharmacokinetic study

Larotrectinib is a first-generation tropomyosin kinase inhibitor, approved for the treatment of solid tumors. In this paper, we present a validated dried blood spot (DBS) method for the quantitation of larotrectinib from mouse blood using HPLC–MS/MS, which was operated under multiple reaction monitoring mode. To the DBS disc cards, acidified methanol enriched with internal standard (IS; enasidenib) was added and extracted using tert-butyl methyl ether as an extraction solvent with sonication. Chromatographic separation of larotrectinib and the IS was achieved on an Atlantis dC₁₈ column using 10 mm ammonium formate–acetonitrile (30:70, v/v) delivered at a flow-rate of 0.80 ml/min. Under these optimized conditions, the retention times of larotrectinib and the IS were ~0.93 and 1.37 min, respectively. The total run time was 2.50 min. Larotrectinib and the IS were analyzed using positive ion scan mode and parent–daughter mass to charge ion (m/z) transitions of 429.1 → 342.1 and 474.1 → 267.1, respectively, were used for the quantitation. The calibration range was 1.06–5,080 ng/ml. No matrix effect or carryover was observed. Hematocrit did not influence DBS larotrectinib concentrations. All of the validation parameters met the acceptance criteria. The applicability of the validated method was shown in a mouse pharmacokinetic study.     

The first excited single-proton resonance in 15F by complex-scaled Green's function method

The complex-scaled Green's function(CGF)method is employed to explore the single-proton resonance in 15F.Special attention is paid to the first excited resonant state 5/2+,which has been widely studied in both theory and experiments.However,past studies generally overestimated the width of the 5/2+state.The predicted energy and width of the first excited resonant state 5/2+by the CGF method are both in good agreement with the experimental value and close to Fortune's new estimation.Furthermore,the influence of the potential parameters and quadruple deformation effects on the resonant states are investigated in detail,which is helpful to the study of the shell structure evolution.     

基于SWT方法的钢绞线索微动疲劳特性分析

为得到钢绞线索丝间接触区的应力场分布并预测微动疲劳裂纹萌生位置和微动疲劳寿命，本文利用参数化方法建立了精细化的钢绞线拉索有限元模型，包括整索模型和不同层丝间接触区域的局部精细化子模型．分析了钢绞线索在两种交变荷载工况下的应力场变化情况，并基于多轴疲劳SWT(Smith-Watson-Topper)临界平面法进行了疲劳特性分析和疲劳寿命预测．主要结论如下：钢绞线索内接触区边缘处的微动幅值较大，中心处几乎没有相对滑动，微动疲劳的初始裂纹萌生点位于接触区域边缘；经不同区域子模型分析比较，在轴向循环荷载作用下，外层钢丝的接触区域比内层钢丝更易发生微动疲劳损伤；在横向位移循环荷载作用下，同层钢丝因位置角度不同而产生了较大的疲劳特性差异，且相比轴向循环拉伸，该工况下最不利单丝的微动疲劳寿命更低；与非接触区域相比，接触区的疲劳寿命大幅降低，微动现象对钢绞线索的抗疲劳性能有明显降低作用．     

New measurements and reanalysis of 14N elastic scattering on 10B target

The angular distributions of elastic scattering of ¹⁴N ions on ¹⁰B targets have been measured at incident beam energies of 21.0 and 24.5 MeV. Angular distributions at higher energies 38–94.0 MeV (previously measured) were also included in the analysis. All data were analyzed within the framework of the optical model and the distorted waves Born approximation method. The observed rise in cross sections at large angles was interpreted as a possible contribution of the α-cluster exchange mechanism. Spectroscopic amplitudes SA₂ and SA₄ for the configuration ¹⁴N→ ¹⁰B +α were extracted. Their average values are 0.58±0.10 and 0.81±0.12 for SA₂ and SA₄, respectively, suggesting that the exchange mechanism is a major component of the elastic scattering for this system. The energy dependence of the depths for the real and imaginary potentials was found.     

Yb3+掺杂稀土钽铌酸盐的晶体场从头计算研究

Yb³⁺掺杂晶体材料是重要的激光材料,在超短脉冲激光、大功率激光等领域有重要应用前景,但长期以来很难通过实验拟合确定Yb3+晶体场参数,尤其是低对称体系,从头计算是解决此问题的重要途经.本文介绍了适合计算稀土离子掺杂晶体的从头计算DV-Xα方法和有效哈密顿量模型,用该方法计算了Yb³⁺掺杂M型和M'型钽铌酸盐的晶场参数和旋轨耦合参数,得到的能级结构和实验能很好地符合,并发现了Yb³⁺掺杂钽铌酸盐的晶场强度参数随稀土原子序数呈现规律变化.表明结合DV-Xα计算和有效哈密顿量方法是计算Yb³⁺掺杂低对称钽铌酸盐晶体场的有效途径,结果显示Yb3+掺杂钽铌酸盐晶体有望成为新型全固态激光工作物质.     

New interaction solutions and nonlocal symmetry of an equation combining the modified Calogero–Bogoyavlenskii–Schiff equation with its negative-order form

The nonlocal symmetry is derived for an equation combining the modified Calogero–Bogoyavlenskii–Schiff equation with its negative-order form from the truncated Painlevéexpansion method. The nonlocal symmetries are localized to the Lie point symmetry by introducing new auxiliary dependent variables. The finite symmetry transformation and the Lie point symmetry for the prolonged system are solved directly. Many new interaction solutions among soliton and other types of interaction solutions for the modified Calogero–Bogoyavlenskii–Schiff equation with its negative-order form can be obtained from the consistent condition of the consistent tanh expansion method by selecting the proper arbitrary constants.     

High coercivity in α-Fe2O3 nanostructures synthesized by surfactant-free microwave-assisted solvothermal method

In this report, the cube-like shaped α-Fe₂O₃ nanostructures were prepared by the simple microwave-assisted solvothermal method without using any surfactants. The as-prepared samples were characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The well dispersed and size-controlled cubic-like shaped α-Fe₂O₃ nanostructures were obtained by systematic variation of solvents, reaction temperature and time. The magnetic studies manifest that the magnetic properties of α-Fe₂O₃ samples are strongly dependent on the shape and size of the nanostructures. The maximum coercivity (Hc) ∼5.6 kOe is observed for Fe-160-30 sample, which is originating from the varying synthesis conditions, oriented sub-particle structures, surface spin disorder, surface/interface anisotropy and interactions of the nanoparticles at the surface/interface of the nanostructures. Represented synthesis approach facilitates the preparation of nanostructured materials with controlled morphology and properties.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点，以边单元作为求解点，改进传统的格林元方法，减少未知数和求解矩阵维度；并提出基于改进格林元的加密网格加密方法，保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比，验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析，结果表明：①格林元方法是一种高精度的动态模拟方法，将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度；②改进格林元方法的加密基于叠加原理，不需要通过插值近似，其求解精度高.在相同加密网格条件下，基于本文改进格林元方法的加密效果比有限差分加密效果更佳；③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大，在动态分析和参数反演时，应着重考虑这些因素的影响.